Всё зависит от того, с какой целью вы используете компьютер, и сколько у вас оперативной памяти. Следует учесть, что NTFS работает несколько медленнее чем FAT, из-за дополнительно загружаемых сервисов и её системы безопасности. Если у вас мало оперативной памяти, и вы решили поставить себе XP, то вам однозначно нельзя ставить себе NTFS. Если у вас 128MB или больше, то можно уже подумать об NTFS. Следует взвесить преимущества и недостатки NTFS для простого пользователя и решить, что вам нужно. К преимуществам FAT32 можно отнести то, что она быстрее и требует меньше памяти для работы. Если система работает только с FAT32, то в память не грузятся драйвера и сервисы, необходимые NTFS. Кроме этого, при использовании FAT32 имеется возможность доступа к диску при загрузке с загрузочного флоппи W9x. Преимущества NTFS для простого пользователя можно описать одним ёмким словом: indestructible. На полном серьёзе, вышибить NTFS чрезвычайно сложно, хоть и возможно. Для опыта запускалась куча различных приложений, оптимизаторы диска, и в самые неподходящие моменты жалась кнопка reset. Повторение этого садизма добрый десяток раз никакого впечатления на систему не произвело, она продолжала работать без ошибок. Кроме этого, NTFS обладает встроенными средствами шифрования файлов, что обеспечивает определённую уверенность в сохранности данных. Конечно, при условии что система не будет переустанавливаться.
NTFS выросла из файловой системы HPFS, разрабатываемой совместно IBM и Microsoft для проекта OS/2. Она начала использоваться вместе с Windows NT 3.1 в 1993 году. Windows NT 3.1 должна была составить конкуренцию серверам на базе NetWare и Unix, поэтому NTFS вобрала в себя все тогдашние технологические достижения. Вот основные из них:
Работа с большими дисками. NTFS имеет размер кластера 512 байт, что в принципе оптимально, но его можно менять до 64К. Более важно то, что NTFS способна теоретически работать с томами размером в 16,777,216 терабайт. Теоретически, потому что таких жестких дисков пока просто не существует, и появятся они весьма не скоро.
Устойчивость. NTFS содержит две копии аналога FAT, которые называются MFT (Master File Table). В отличие от FAT MSDOS, MFT больше напоминает таблицу базы данных. Если оригинал MFT повреждён в случае аппаратной ошибки (например, появления bad-сектора), то система при следующей загрузке использует копию MFT, и автоматически создаёт новый оригинал, уже с учётом повреждений. Но это не самое главное. Главное, что NTFS использует систему транзакций при записи файлов на диск. Эта система пришла из СУБД, где защита целостности данных - жизненно важное дело. Уже это говорит о её эффективности. В упрощённом виде она работает так:
Драйвер ввода/вывода NTFS инициирует процесс записи, одновременно сообщая сервису Log File Service вести лог всего происходящего.
Данные пишутся в кэш, под управлением сервиса Cache Manager.
Cache Manager посылает данные Virtual Memory Manager-у (менеджеру виртуальной памяти), для записи на диск в фоновом режиме.
Virtual Memory Manager посылает данные драйверу диска, пропустив их через Fault Tolerant Driver (если у вас массив дисков RAID).
Драйвер диска шлёт их контроллеру, который уже пишет их либо в кэш, либо прямо на диск.
Если эта операция проходит без ошибок, запись лога удаляется.
Если происходит сбой, запись лога остается в таблице транзакций, и при следующем доступе к диску Log File Service обнаруживает эту запись, и просто восстанавливает всё как было до этой операции.
Такая система гарантирует абсолютную сохранность данных в случае копирования, перемещения и удаления файлов или директорий. При внесении изменений в файл, вы теряете те изменения, которые находились в момент сбоя в памяти или в кэше контроллера, и не успели записаться на диск.
Защищенность. NTFS рассматривает файлы, как объекты. Каждый файловый объект обладает свойствами, такими как его имя, дата создания, дата последнего обновления, архивный статус, и дескриптор безопасности. Файловый объект также содержит набор методов, которые позволяют с ним работать, такие как open, close, read и write. Пользователи, включая сетевых, для обращения к файлу вызывают эти методы, а Security Reference Monitor определяет, имеет ли пользователь необходимые права для вызова какого-либо из этих методов. Кроме этого, файлы можно шифровать. Правда, с шифрованием стоит быть осторожнее. Если у вас рухнет система, или вы её переустановите то вы не сможете прочитать зашифрованные файлы, если не имеете ERD.
Компрессия данных. NTFS позволяет компрессировать отдельные каталоги и файлы, в отличие от DriveSpace, который позволял сжимать только диски целиком. Это очень удобно, для экономии пространства на диске, например можно сжимать "на лету" большие графические файлы формата BMP, или текстовые файлы, причём для пользователя всё это будет прозрачно.
Поддержка формата ISO Unicode. Формат Unicode использует 16bit для кодировки каждого символа, в отличие от ASCII, который использовал 8bit, или ещё хуже - 7bit. Для простого пользователя это означает то, что теперь он может называть файлы на любом языке, хоть на китайском - система это будет поддерживать, не требуя изменить кодовую страницу, как это делал DOS и W9x.
часть текста была взята из статьи WinXP FAQ с сайта
http://www.3dnews.ru/.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
File Systems
For small volumes, FAT16 or FAT32 usually provide faster access to files than NTFS because:
The FAT structure is simpler.
The FAT folder size is smaller for an equal number of files.
FAT has no controls regulating whether a user can access a file or a folder; therefore, the system does not have to check permissions for an individual file or whether a specific user has access to the file or folder. This advantage is minimal because Windows 2000 still has to determine if the file is read-only, or whether the file is on a FAT or NTFS volume.
NTFS minimizes the number of disk accesses and time needed to find a file. In addition, if a folder is small enough to fit in the MFT record, NTFS reads the entire folder when it reads its MFT record.
A FAT folder entry contains an index of the file allocation table, which identifies the cluster number for the first cluster of the folder. To view a file, FAT has to search the folder structure.
In comparing the speed of operations performed on large folders containing both long and short file names, the speed of a FAT operation depends on the operation itself and the size of the folder. If FAT searches for a file that does not exist, it has to search the entire folder— an operation that takes longer on a FAT structure than on the B-tree structure used by NTFS. In mathematical terms, the average time to find a file on a FAT folder is a function of N/2, where N is the number of files. On an NTFS folder, the average time is a function of Log N.
Several factors affect the speed with which Windows 2000 reads or writes a file:
Fragmentation of the file. If a file is badly fragmented, NTFS usually requires fewer disk accesses than FAT to find all of the fragments.
Cluster size. For both file systems, the default cluster size depends on the volume size, and is always a power of 2. FAT16 addresses are 16 bits, FAT32 addresses are 32 bits, and NTFS addresses are 64 bits.
The default FAT cluster size is based upon the fact that the file allocation table can have at most 65,535 entries, so the cluster size is a function of the volume size divided by 65,535. Therefore, the default cluster size for a FAT volume is almost always larger than the default cluster size for an NTFS volume of the same size. The larger cluster size for a FAT volume means that there might be less fragmentation in files on a FAT volume.
Location of small files. With NTFS, small files are entirely contained within the MFT record. The file size that fits in the MFT record depends upon the the number of attributes for the file.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The version of NTFS included with Windows 2000 can take advantage of many advanced features not available by using other file systems. As such, using NTFS wherever possible is recommended to gain the maximum benefits from Windows 2000.
Advantages of NTFS
Formatting Windows 2000 volumes with NTFS instead of FAT allows you to use advanced features that are available only on NTFS, including the following:
NTFS is a recoverable file system. A user seldom needs to run a disk repair program on an NTFS volume. NTFS guarantees the consistency of the volume by using standard transaction logging and recovery techniques. In the event of a system failure, NTFS uses its log file and checkpoint information to automatically restore the consistency of the file system.
NTFS supports compression on volumes, folders, and files. Files that are compressed on an NTFS volume can be read and written by any Windows-based application without first being decompressed by another program; decompression happens automatically during the file read. The file is compressed again when it is closed or saved.
NTFS supports all Windows 2000 file system features.
NTFS does not restrict the number of entries in the root folder.
Windows 2000 can format volumes up to 2 terabytes with NTFS.
NTFS manages disk space more efficiently than FAT, using smaller clusters (4 KB for volumes up to 2 terabytes).
The boot sector is backed up to a sector at the end of the volume.
NTFS minimizes the number of disk accesses required to find a file.
On NTFS volumes, you can set permissions on shares, folders, and files that specify which groups and users have access, and what level of access is permitted. NTFS file and folder permissions apply to users working on the local computer and to users accessing the file over the network from a shared folder. You can also set share permissions that operate on network shares in combination with file and folder permissions.
NTFS supports a native encryption system, EFS, that uses symmetric key encryption in conjunction with public key technology to prevent unauthorized access to file contents.
Reparse points enable new features such as volume mount points.
Disk quotas can be set to limit the amount of space users can consume.
NTFS uses a change journal to track changes made to files.
NTFS supports distributed link tracking to maintain the integrity of shortcuts and OLE links.
NTFS supports sparse files so that very large files can be written to disk while requiring only a small amount of storage space.
Disadvantages of NTFS
While NTFS is recommended for most Windows 2000 users, it is not appropriate in all circumstances. Disadvantages of NTFS include:
NTFS volumes are not accessible from MS-DOS, Windows 95, or Windows 98. The advanced features of the version of NTFS included with Windows 2000 are not available in Windows NT.
For very small volumes that contain mostly small files, the overhead of managing NTFS can cause a slight performance drop in comparison to FAT.
A former disadvantage of NTFS was accessing the NTFS-formatted system volume when corrupted or deleted system files prevented the computer from starting. In the past, it was a common requirement that Windows NT be installed to a second, separate folder to access the NTFS system volume of the first installation.
Windows 2000 resolves this problem by offering a pair of new troubleshooting tools. The first tool, known as Safe Mode, allows Windows 2000 to be started with only the basic set of device drivers and system services loaded. Safe Mode allows a system that cannot start, due to system corruption or the installation of incompatible drivers or system services, to bypass those blocking issues, enabling the local administrator to resolve the problem.
If the damage to the operating system files is severe enough that the computer cannot start even in Safe Mode, you can start the computer from either the Windows 2000 operating system CD or Setup floppy disks by using the Recovery Console. The Recovery Console is a special command-line environment that enables the administrator to copy system files from the operating system CD, fix disk errors, and otherwise troubleshoot system problems without installing a second copy of the operating system. For more information about Safe Mode and the Recovery Console, see Troubleshooting Tools and Strategies in this book.
Formatting the System Volume in Multiple-Boot Configurations
If you want to start another operating system, such as Windows 95, Windows 98, Microsoft® Windows® for Workgroups, or MS-DOS, use FAT16 for your system volume and the boot volumes for the other operating systems. You can use NTFS for the Windows 2000 boot volume and other volumes on the computer, if those volumes cannot be accessed by an operating system other than Windows 2000.
© 1985-2001 Microsoft Corporation. All rights reserved
Исправлено: [VIPs]Gas 14 сентября 2002 года, 13:17